low OSM value

Hello everyone, I have just finished the fine calibration.
But I got high Leesallee value (like 0.92****) and low OSM value.
Is that all right?
The highest OSM value calculated after the coarse calibration is 0.206**,and after the fine calibration, it becomes even lower, with a highest value of 0.045***.

Thanks for your attention!

Ke Zhang

One comment on “low OSM value

  1. I’ve not seen the combination of high LeeSal and low OSM. Check each of the values going into the OSM calculation, and see if one value in particular is dragging it down. Also, the every high Leesal might be because there is very little new growth. Take a look at the output images.

    Keith Clarke

Leave a Reply